PDA

View Full Version : 999s coil slightly corroded



jimmy46
14.02.2013, 07:46 AM
Hi guys me again. Went to change my spark plugs for iridium ones. Coil shaft is furry (slightly) corroded. What's best to get this off or better just leaving it. Cheers jimmy. :cool:

Derek
14.02.2013, 09:24 AM
Give it a light rub with a kitchen scouring pad then apply a light coat of ACF50. When installing the coil apply a liberal amount of silicon grease or vaseline to keep water out.

chrisw
14.02.2013, 09:50 AM
+1 to Derek's advice

The horizontal cylinder will always be prone to this. Keep on top of it and the coil won't get stuck in the bore due to excess corrosion.

jimmy46
14.02.2013, 02:39 PM
Cheers guys :)