+ Reply to Thread
Results 1 to 2 of 2

Thread: Fitting tail pack

  1. #1
    Join Date
    27.06.2007
    Location
    Harrogate
    Ducati models
    916 RIP, 996 BP
    Posts
    356

    Default Fitting tail pack

    Bought Kreiga 20 tail pack for Masher, looks good. Fitting to 996...

    Ducati mould the bolts retaining the pillion pad into the plastic of the pad so when you re-tighten the nuts, after threading through the straps for the tail pack, it pulls the bolts out the plastic and your knackered. Unless Rockjock has a shop nearby and you can get a quick fix. Thank you RJ.

    So to fit a Kriega; get additional washers and put them on the pad side of the fixing hole to stop the head of the nut being drawn out of the plastic pad base. Of course, obvious design fault as there should have been some anyway- Ducati.

    Has anyone got a red pillion pad for 996 BP for sale, mine has a drill hole through now.

  2. #2
    Join Date
    30.04.2008
    Location
    Edinburgh
    Ducati models
    SC1000, 748, HyperS, SCR
    Posts
    395
    I've got one spare off my 748. It needs a good clean but I'm open to offers. PM me if your interested.

    The pics make it look better that it is, but there are no tears or damage - if you interested PM me with an offer - I may be able to brign it to the masher but can't promise as I too use a US-20 and am not sure I'll have room! I doubt it'llcost much to post anyway.

    R
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	P1010205.jpg‎
Views:	55
Size:	42.1 KB
ID:	4927   Click image for larger version

Name:	P1010206.jpg‎
Views:	61
Size:	44.2 KB
ID:	4928  

+ Reply to Thread

Similar Threads

  1. Monster 1100s tank bag and tail pack
    By BruceCampbell in forum Technical, Problems, Tips and tricks
    Replies: 0
    Last Post: 06.04.2010, 08:48 PM
  2. MPL Basket, Barnett Pack, Clutch Won't Work - Help Please!!!?
    By Guido in forum Technical, Problems, Tips and tricks
    Replies: 21
    Last Post: 21.09.2009, 11:34 AM
  3. Carbon Fibre Tail Unit for an 1198
    By pdk657 in forum Technical, Problems, Tips and tricks
    Replies: 3
    Last Post: 16.05.2009, 06:31 PM
  4. Fitting Monster top yoke and clipons to an SS
    By 239desmo in forum Technical, Problems, Tips and tricks
    Replies: 5
    Last Post: 05.07.2007, 09:24 PM
  5. Slipper clutch pack size ?
    By iang27 in forum Technical, Problems, Tips and tricks
    Replies: 4
    Last Post: 09.05.2007, 07:52 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts