Good afternoon all.
My monster has been undergoing a bit of restore for the past 6 months and I've hit a problem with the indicators. Now i am a spark by trade and no stranger to a multi meter but with the instrument panel plugged in my indicators act like hazards.
With the instrument panel unplugged they act normally. I have fitted LED indicators with an electronic relay which all work fine until the panel is plugged in.
Ive then disconnected all LEDs and with a multimeter checked the voltage at each point FL FR and RL and RR and they all have power on them with the instrument panel plugged in to I'm almost certain the fault lies with the panel, which did work until I removed it.
The turn signal lamp is also ok.